SPINCap PRESENTATION

SpinCap SC-801Mn, is an innovative locking and acceess control system for fuel tanks ith data collection, administrator and surveillance functions

 

Easy, practical and quick to install:

 

With the help of a mobile device and a dedicated app, authorized operators will be able to monitor and operate on the tanks in record time and in complete safety

INSTALLATION AND FIRST LOCKING

Inside the original packaging you will find:

SPINCap, COLLAR

  • 1) First you have to access to the tank and unscrew the plastic cap

  • 2) Screw and install the collar on the filling valve and apply the safety seal
  • 3) Start the application(network coverage is necessary) type in the credentials to log in and provide all required phone permission (BLE,GPS,Camera)
  • 4) Move the SPINCap by hitting it slightly to the side
  • 5) Press the button “CONNECT TO SPINCAP” and select the reference serial number
  • 6) Select “INSTALL” from the menu and when required scan with the phone’s camera the QR code on SPINCap label
  • 7) Place the SPINCap and rotate it at least 1-2 turns within 10 seconds and return to the main page to complete the installation
  • 8) Press and keep pressed the RED button for 1 second
  • 9) Insert tank filling percentage and press “Ok” to confirm
  • 10) When required, lock the valve by turning 2 clockwise turns
  • 11) When required, immediately turn the SPINCap 1/2 counterclockwise turns

  • 12) Press “DISCONNECT” button and confirm, installation is completed(close the tank)

UNISTALLATION

  • 1) Access to the tank, start the application(network coverage is necessary) type in the credentials to log in and allow the use of Bluetooth

  • 2) Turn the SPINCap to “wake it up”, press the “CONNECT TO SPINCAP” button and select the reference serial number
  • 3) Press the GREEN button for 1 second and unscrew the SPINCap
  • 4) Open the side menu, select “INSTALL”, press “UNISTALL” and press “Ok” button
  • 5) Wait for the 4 steps to complete
  • 6) SPINCap is now uninstalled and can be removed
  • 7) Go back to the main page and press “Disconnect” confirming the action
  • 8) Open the tank, remove the collar and replace it with the original valve

  • 9) close the tank